AviatorPA11
Registered User
Fallbrook, CA
Hi guys, I was looking at Atlee Dodge website. Saw extended baggage for -18, anybody know where I can find for the -11? Thanks
AviatorPA11 said:Hi guys, I was looking at Atlee Dodge website. Saw extended baggage for -18, anybody know where I can find for the -11? Thanks
cubdriver2 said:PS if I did it today, I would lay the bellcrank on its side, its less work.
Ken Kennedy said:In the Atlee Dodge STC it does have a note"This modification may not be made unless the PA-18 elevator control system is installed. Dwg. reference is12446" I too like the feel of the bellcrank of the PA-11 and not the pulley set up like on a PA-18,so when ours was installed the depth was reduced slightly and the bellcrank left in place.Don't tell a soul
AviatorPA11 said:So can this mod be easily done with fabric still on? I have the original storage "box" with wooden lid. I also have fishing pole tube installed. Is this going to be a problem? The way I am thinking is that, if I shorten the depth of the baggage to clear the bell crank, there isnt a whole lot of room between the bottom of the fishing pole tube and the bottom of the baggage floor? Maybe I need to go and look and measure it.