WanaBNACub
Registered User
Off Airport
I also finished the repair on the belly pod. That saved me a big expense and turned out satisfactory!
While I was at it, I fixed the damage in both cowling halves. and got them ready for paint.
Taping and polybrush done on the wing, time to move on to other tasks...
Started fabricating the baggage doors
Started laying out the panel and fitting the instruments
And removed the springs from the seat replacing it with fabric to save a little more weight.
While I was at it, I fixed the damage in both cowling halves. and got them ready for paint.
Taping and polybrush done on the wing, time to move on to other tasks...
Started fabricating the baggage doors
Started laying out the panel and fitting the instruments
And removed the springs from the seat replacing it with fabric to save a little more weight.