Search results

So I heard through the grapevine that the DC-4 literately lost an engine, as in fell off the airframe. On the video you can see an explosion before the aircraft rolls. That explosion is the fuel tank, which in turn took out the left aileron. The ailerons on the -4 are closed loop system so that...

2007, already 17 years ago when we finished that cub.

Is there staining on your cross bar? Just a hunch but it could be leaking inside the carry through tube and traveling down the bar on both ends, would explain why you are getting it near your pitot tube. --Brian

New website https://www.maggieignitionsystems.com/ --Brian

F Atlee Dodge. Looks to me like someone welded in a set without paperwork then decided to cut them off and moved the belts back to the seat. I would get the STC from Atlees and put them back in. Biggest issue is they are welded to the tube under the floor. Will take some work and probably fabric...

It’s been a few months since we have heard anything from you Charlie. Hope you are doing well. —Brian

None of the 0-360 STC's require 18 tail feathers. In fact, on our 0-360 STC with constant speed prop combination we purposely installed a set of stock round tip wings for flight testing so that the modified wings would not have to be a "requirement" for the STC. That said. We ran a set of -18...

Tucano that belongs to some friends of mine. I maintain the Katmai 182 behind it. They also have a few PC-9’s. A very long wing. 😂 L2-M. Let’s see. Tent, sleeping bag, cooler, table, marine batteries, starlink setup, computer. Did I forget something. 🤣

From what I remember 60 gallons, 1 gallon of unusable fuel. --Brian

What gets me is they don’t even bother to take the old label off before applying the new label and then charge you double for it. 🙄 —Brian

I called them and ordered. Thanks. --Brian

82's are wrong size. .198 stud diameter I need 85's, .245 stud diameter. --Brian

I do not need the cowl LATCH, those are fine. I need the flush 1/4 turn fasteners that attach the lower cowl to cowl rails. It seems that Southco is no longer making the 85 series (large diameter) fasteners. --Brian

Just a bit of rain in Southern Oregon.. [emoji1787] Drain pipe plugged up, water run under the back door. An inch of water pretty much the entire shop floor. Friends came out and we got the water drained, drainage dug out with an excavator and the hanger water swept out. And it was about 55 on...

Bringing back an OLD thread.... Anybody try and find Southco 85-14-100 studs recently? I just got off the phone with Genuine Aircraft Hardware, Skybolt, Monroe Aerospace, Wicks and searched via Google with absolutely Zero luck trying to find any. Does anyone here know of an alternate part or...

Friend of mine just got this Highlander XL signed off. 160 HP 0-320, Ground adjustable prop, came in right at 850 empty. Have yet to fly it due to weather and other factors. —Brian

Pretty much LOL..

My sons 2003 Mitsubishi Eclipse had a set of those at one time. I say had because they were removed before we bought the car and the paint has faded enough on the top to show where they were attached with some type of double sided tape. I do know that they are supposed to make the rear spoiler...

You wouldn't happen to know anyone that has gotten a field approval using one of their props on a 0-200 Continental? I have a customer that would like to do it on his Cessna 140 with 0-200 conversion. --Brian

I have a bead roller.. rare as hens teeth, no you can’t borrow it. [emoji1787] —Brian