Search:

Tim told me that was the rule in Maine.

Perhaps a supplier of testosterone free adult beverages can be found?

Tim's quite a rope guy, he knows two knots, the severe turn and another useful one, the panicked hitch. Takes a sharp knife to undo both. Jim

There may be an accepted practices standard, however the bi-metallic strip sees current in either direction as heat and would perform the tripping action irregardless of current direction, wouldn't...

Workin' on Tim's screen?

I'll be there for brunch. Jim

Omni is not an aircraft hose shop as far as I know. Pick a hose shop out of TAP and send them a hose to duplicate or determine the number by hose diameter and length and fitting style and order a...

NAPA or any other hose builder. Jim

Pundy, talk to Catto and get them to get a prop certified for you. Tell them they will sell at least two, I'll buy one. Jim

http://www.aircraftspruce.com/catalog/eppages/airwolfoilchiller.php is a $150 option. Or make sure your baffles are as fussy as these ...

Oh boy, summers here, so much flying and so little time. Jim

Cracked aileron bellcrank due to leaving out washers on both sides of ball ends. Changing them on a covered wing will require one small hole on the top side to remove/reinstall the bolt. Decide now...

Or modify a TSO'd ski with UHMW? Jim

Apparently John Schwaner has retired, his web site has shut down. Lots and lots of interesting information no longer available, he was my go to guy for the good answer. Sad to see him gone. Jim

The Haveman STC requires removal of the starter and generator on a -12 engine. I think I have a copy of it and will gladly provide a copy to you, send an email. Jim

Chuck, how about some details on those sweet lights? Jim

I have a solenoid that reads infinity, max resistance, from either of the control circuit studs to the case. It is a continuous duty solenoid, not a starter. To operate it requires a positive on one...

Cooperstown must be a blessed place. We did not get an extra hour of sun in Glens Falls with DST but we are gaining about 3 minutes a day. We'll catch up.

http://www.smith-wesson.com/webapp/wcs/stores/servlet/Category4_750001_750051_775657_-1_757896_757896_image is where I would send it. Jim

Friend of mine just got a free frame replacement on an '01 Tacoma, apparently it's a recall for rust, an 01! Can't see any of the US big 3 stepping up like that. Good luck on your search. Jim

Dodd and 1868f check your email. Sorry for the pics but I am having scanner issues. I would modify this tool slightly, move the hook to the end and the pivot to the center. Now, while sitting in the...

There is a plan to build a tool in a back issue of CubClues, I can dig it out if you need it. Jim

I knew an old flyer from my home town that flew scenic rides in a 108 PA-12 when I was a kid. I helped rescue it off the rocks one evening when it broke loose from it's mooring and got a ride in it....

:smile:

Tim, what's your plan for the Bay of Fundy? Goin' around or across?