My question could you just apply the stuff to rock cuts without doing the entire tire and do you think it would peel off if only done on small spots. I have a nice set of 30inch airstreaks for the...
Type: Posts; User: shouldhunt
My question could you just apply the stuff to rock cuts without doing the entire tire and do you think it would peel off if only done on small spots. I have a nice set of 30inch airstreaks for the...
I have to admit, I was not taught rudder skills in 172's even with my instrument rating. Get your license first as it is a license to learn and the aero club is alot cheaper, cause at 45-50 hours...
Just got back from there, was windy but not bumpy at 3000 feet and once you got past the butte, was good to go. Captain Ron also showed up in his pacer. We shot his pistol, had a soda and watched 3...
I bid on a set on ebay a couple weeks back and i think they went for like $350. Good luck finding them, Ive been looking and they are hard to find.
84Zulu, did i say same amount of weight or at gross? And way i read it was dirrected at scooter, see you all wednesday nite:)
First of all it's a super cub.org get together and a not neessary a cub fly-in or let me set up the fly-in and camp site and see how many cubs have problems getting in who aint use to rocks, or...
What ever you do, dont but the Eureka Timberline tents, any wind will break them down, was on the pennisula for a moose hunt and two was crushed in 15 minutes, I put up a cheap coleman that was...
Flew in there today and landed in my little citabria, and its one of the only places with half of the strip open for landing. It still winter back there but opening soon. If I get the time, I will...
I have scout gear on my 7GCBC and with my 31" bushwheels properly dialed in there is no bounce(when pilot skills not an issue). The one piece gear should even be stronger (ever see cub gear fold up...
Air time minutes are $50 dollars more every 6 months for Alaska time, than I currently pay.
Nanook, your theory on Fuel is incorrect, since only approved fuel still produced is 100 LL, unless you pay for a STC to deviate and use auto fuel. 100 LL has plenty of octane for the compression...
Wow, thats lots of math! First still dont think an STC is required cause its less than 10% power increase, and I use Philips XC with a 160 hp upgrade with about 300 hours and burn 1.5 quarts of oil...
Skywagon, hate to disagree but with My experience with props, but on my 7GCBC the cruise speed difference is huge, cruise prop 109 mph and seaplane prop 93mph. Float's may have some effect, but I...
Currently I have a set of flat back double puck brakes on my plane, and also have an extra set of high pressure brakes, that ive been saving for my experimental cub project. I was wondering who much...
Mapsource is easy and you can store them in case you have internal GPS problems or someone adopts yours like they did my old 296.
Will tell you first these guys painting with these cans do a great job, Just got back from old Vegas and bought a picture made like this, but in truth, these days, rustoleum is much more stable than...
Ok building an experimental, got my tail feathers built and thru silver, working on fuselage, and my next question is leaning towards about overhead trim system, and looking for any drawings and or...
Always sandbast and punch test, but next question is, supposedly, tubes allot of the time rust from inside. Why can't you get that rust treatment stuff that turns the steal back and pour it into the...
In the past I heard of people putting bed liner on air streaks, any information on proper application would be appreciated.
Numer one choice, Some call it cub board, Call randy at PlasChem in Anchorage, stuff is great and alot lighter if you still can get it approved. Carbon fiber, foam, and fiberglass layers I think,...
I would never buy a plane I did not fly until it comes up to temp. If your selling an aircraft, insurance is well worth the few hundred dollars. If your buying, your going to pay for a prebuy...
Ok, Northland Avaition out of Fairbanks use to have a multiple field approval, and they said they could get it approved, so I bought the gear. Then they said they could no longer get approved. Then...
First lets face it, there are allot of inexperienced CFI's in all the flight schools, here in Alaska and the lower 48 who is just building time. In the age of information, most people between videos,...
My 2 two pennys worth, good ground instruction should be worth $25 per hour, average air instruction should be $25-$35 per hour, with great flight instruction priceless. I have seen way to many...
A friend of mine checked into the 7gcb, and no one knows when the motor was put in or what it was out of. Also another friend said it was prop struck a couple of years ago in the arctic out of Happy...
