Search:

I'm using zephyr charts.
It has a few little issues , such as not being able to zoom down to a fine resolution, and having to zoom back out to scroll the map, but so far it does what I need. You...

Hi Israel
I had a similar quandary ie: experimental 14, flying in Alaska, iPad or GPS ?

I went with the iPad, because of the future possibilities. (iPad 2, with internal gps only)

What I've...

I sent a couple of 29s through the post office for $30 a tire. Just pasted a sticker on the tire. ( they did arrive )
Laz

FWIW
Had some wind in the early morn. But not out of the ordinary for Girdwood.

The wind is just now picking up, along with the rain increasing.

Some wind and rain in girdwood, but nothing too bad. So far.

Hi everyone,

Because i hope we can learn from this tragedy.

The story as I know it:

George was a long time friend. He was also doing the remodel on my house this summer. We talked the...

Steve
Found them at AC spruce.
Experimental only!

Sorry, since I left the certified word, I never looked back :-)
Laz

I'm experimental, but check their website.
I don't have an address or phone # with me right now(traveling). But I think they are still D&E?

I bought a complete set of stainless wires and brackets from DE in Florida. The price was very reasonable, although I can't remember what I was :-)
Laz

Thanks,
Hard to look at.
I was just taking to him yesterday......

I just got news that a friend was killed today, in or around Homer!
He was flying a floatplane (Citabria) and hit some wires. Anyone have any info?
Laz

Hi Marty
Welcome back from "moving hell".
Hope everything is settling down.
I built a pair of Dakota lookalikes.
I think I got them out of 1 sheet of aluminum (4X12X 060 or 048)
Only took one...

On my 2+2 I ran both flap cables back and down separately . Then under the floor to the flap handle , which is center mounted between the seats. Turnbuckles at both flap bell cranks.
Cost an extra...

I've had a Luscombe 8E for the past 25 years. It's a little small, but will take two people and light camping gear. Cruises at 100mph @5gph.
Finished my experimental cub last spring and have it for...

Something fairly simple to try:
My gauge was "vibrating" after reassembling my engine (it hadn't before). I bled the line at the gauge and it cured the problem.
Laz

I have high cht's at climb out as well. I was thinking of having the carb flow -checked . Would that answer the fuel flow question?
Also, I would like to know more about the e gap timing symptoms....

I have a new Ipad2 and I want to use it with a moving map display (Alaska). The Foreflight app is really nice, but I'd like to not have a yearly subscription fee. Anyone have a program they like? ...

It worked great for me! My first fabric job (Wag 2+2), so I actually followed the instructions! Much faster, and less sanding than Poly tone (my neighbor was covering at the same time). Only problem...

I use a bench grinder with the wheel dressed round(ish). Pretty quick!

I've been seeing them for $99 in quite a few places.
Of course I paid $149 this winter.

Casper Labs.
Can't use the drain valve. Less mess with the punch method.

Looks like Steve made me smarter automatically!

There was a discussion about prop vibration recently, and I found this link that helps to explain.
Sorry I couldn't post it as a link, ain't smart enough:oops:

...

[quote="Fortysix12"]Why not send a written request to you local FSDO. That's who I used and it was for free.

I went to the local FSDO and never got past the receptionist. Seems like the feds are...

I'm looking for one right now, for the final on my experimental. I'll let you know what happens.

Laz