jgerard

You will never regret buying 31's I have landed with a flat tire before and it's not a big deal. Other than user inflicted damage I have not seen...

Get a copy of the PA-18 parts book, Get the northland CD, And use this website for some of the drawings...

Jerry Burr has proved many times over the years that HP alone does not win STOL contests. His 0-200 powered cub is quite impressive. Jason

The "ANY OTHER" part of the TCDS does not allow for non certified props, sorry guys...... :-( What it means is that you can install any other...

Yup, same parts

An O-360 has the same bore diameter but has a different case, camshaft, crankshaft, sump, and carb. The 320-360 conversion is called an engine swap...

I think the stud kit is up to around $1200 now. When using the banana plates on the narrow deck engines you need longer cylinder hold down studs. All...

all 8.5:1 (160 hp) and higher compression ratio engines have chrome or nitrated cylinders. The standard steel cylinders do not hold up that long with...

Huh.... I thought only the 0-290 D2 135hp was the smallest Lyc the Borer prop was approved on. Jason

Not that big of a deal. A good Tig welder can fix that with out any fabric work required. The broken ends can be tacked back into place and then a...