Owner Alton Bouchard passed away at 59
I just uploaded a Riblett 613.5 airfoil drawn at 1:1 with 63in cord for Piper Cubs and Wag Aero. I hope itīs of use for everyone interested. Click on the image for full size.
Updated 02-14-2013 at 05:01 PM by SpainCub
http://www.cep-usa.com/ Has anyone tried this?
Originally Posted by RobS Twas the night before Christmas, and out on the ramp, Not an airplane was stirring, not even a Champ. The aircraft were fastened to tiedowns with care, In hopes that -- come morning -- they all would be there.The fuel trucks were nestled, all snug in their spots, With gusts from two-forty at 39 knots. I slumped at the fuel desk, now finally caught up, And settled down comfortably, resting my butt.When the radio lit up with noise and with ...
A couple of summers ago, I went to Wipaire Amphibs. . .I cannot begin to express my satisfaction with the changeover. But, yes there is an increase in weight and after reading the many blogs here re: 160 hp upgrade, I decided to bite the bullet and spend the $$$. . .added the Atlee Dodge Hollywood muffler and the 160hp upgrade. . . I couldn't be happier. Lastly, I went from the Bose A10's to the Bose A20's. . . a most worthwhile changeover, also. As a matter of fact, when I tried out the A20's, ...
Recent Comments