PDA

View Full Version : bauman floats



cubdriver55
05-01-2018, 07:44 PM
Can anyone get me measurements for the front and rear struts on Bauman 2100s on a pa18? Thanks Steve

Toolmaker
05-02-2018, 12:35 PM
Mine are 37 3/4" front 33" rear and 51 1/2" diagonal.

Haven't flown it yet but the angle from the float top to the bottom of the wing ended up at 5 degrees

Bill Rusk
05-02-2018, 01:33 PM
These dimensions are from a Std Supercub on Wipline 2100A floats just as a reference point


The diagonal strut = 52.75
Front strut = 37 7/8
Rear Strut = 32.3

All lengths are from the center of the mounting holes

Top of floats to bottom of wing is about 5.5 degrees

Hope this helps some

Bill

john schwamm
05-03-2018, 03:09 PM
Trying to get someone to measure the dimensions for me so I can post them, my Baumanns on supercub are in Alaska and I am not right now.
John

Bill Rusk
05-03-2018, 04:08 PM
John

I’m at the trade show. Is your Cub on hood? If so PM me location and I’ll measure it.

Bill

john schwamm
05-03-2018, 04:36 PM
I will have the measurements by Monday. Exactly what is wanted, center to center bolt holes strut length, or?
Thanks,
John

cubdriver55
05-03-2018, 06:27 PM
Thanks everyone for the measurements and if anyone has a 12 on baumans I could use that measurement also

cubdriver55
05-03-2018, 06:31 PM
yes strut length center to center on bolt holes

mvivion
05-04-2018, 07:06 AM
Just bear in mind the 12 struts MAY be different lengths than 18.

MTV

john schwamm
05-07-2018, 03:30 PM
Baumann strut dimensions, center to center. Front 37 3/4", Middle 52 1/2", Rear 33"
These are from Baumann originals on my PA 18.
John