Javron Inline thrust

Is anyone using this mount that can give me some performance feedback vs. standard engine mount? also, any airflow/cooling issues with the motor 2" lower?

I have that mount. As far as comparisons I canot say. Never flown a standard mount cub. As far as cooling issues. I'm having a hard time keeping my oil temps down. I have a 13 row oil cooler on the number 4 cylinder. Just put some louvers in the lower cowl to help pull more out. I hope that fixes it. Cylinder temps are good though. I have the sutton exhaust so I had to cut a larger hole in the cowl for the exhaust pipe. I coverd it with a cover. I also have fuel injection so I didn't need carb heat so I just cut that part off the exhaust. Otherwise you would have to cut another hole on the other side of the cowling so it would clear. I've attached some pics. Hope this helps. I have lots more pics if you need some from different angles.