False Boot Cowl

storm_pilot · Jan 10, 2013

Anybody know the drawing # for the false boot cowl or another name for it? I have the NL CD and have searched Christian's site as well but can't seem to come up with it.

BTW, Many thanks to Christian for setting that site up. It's a tremendous help for those of us building cubs.

Dave Calkins · Jan 10, 2013

"boot cowl wrapper"

....assuming you mean the narrow vertical sheet metal strip aft of the bootcowl and ahead of the fabric.

Hope this helps

EDIT: "Panel, Fuselage Trim"....per Piper dwg.

I never called it that.....but now i ain't so iggnoant!

storm_pilot · Jan 10, 2013

Thanks Dave. That is what I'm talking about but searching the term wrapper still yields no results. I'm sure that I can just "wing it" but it's always easier to start with a drawing.

tempdoug · Jan 10, 2013

piper 12818-00 and 12818-01 Im not sure if its in the northland drawings that are for sale on this website or not?

scruiser · Jan 10, 2013

Drawing is on Buggs' site.

http://www.supercubproject.com/drawings/pdfs/A3290586.pdf

tempdoug · Jan 10, 2013

http://shop2.supercub.org/Software/Northland-PA18-Digital-Drawing-CD-p65.html and here

storm_pilot · Jan 10, 2013

That's it! Thanks!

Half the battle is knowing the right terminology.

tempdoug · Jan 10, 2013

It is on the Northland cd

spinner2 · Jan 10, 2013

Not too hard to make. I started out with the lower longeron angle pre-bent and then laid the originals out and cut from there.

False Boot Cowl

storm_pilot

Registered User

Dave Calkins

Registered User

storm_pilot

Registered User

tempdoug

scruiser

tempdoug

storm_pilot

Registered User

tempdoug

spinner2

Attachments

Similar threads

False Boot Cowl

Registered User

Casselton, ND

Registered User

Anchorage, Alaska

Registered User

Casselton, ND

nd

California

nd

Registered User

Casselton, ND

nd

Montana

Attachments

Similar threads