PDA

View Full Version : prop



96chevtruck
12-01-2010, 04:15 PM
I am building a Tubine Cub kit with a Aerosport 0-375. What prop would be good for this setup?

bearsnack
12-02-2010, 10:25 AM
The Pawnee prop 1P235 is a good metal prop, also the Catto composite prop is becoming popular with 0-375 owners.

5 Rivers
12-03-2010, 01:00 AM
Whirl Wind Aviation 200G ground adjustable or the 200G/CS constant speed.
I've been very impressed with both.

96chevtruck
01-13-2011, 06:19 PM
Thanks for the info.

96chevtruck
01-13-2011, 06:23 PM
Thanks for the reply. I have seen the Catto props but I wonder about the non-metal leading edge on how it holds up , have you heard anything on it. I saw the video of Valdez and a Cub with a 0-375 and 3 blade Catto which looked nice. Thanks again , Bill.

Iflylower
01-13-2011, 07:55 PM
Stainless leading edge on the Catto now. I'm sure it helps, but it's no bushwhacker.

I've heard a lot of advantages and only a couple, yet important disadvantages...

DW
01-13-2011, 08:07 PM
I just talked with craig today and they have a nickle leading edge for the prop. much better then the SS.

96chevtruck
01-13-2011, 08:42 PM
Thanks, sounds like the Catto might be a good choice being so much lighter.

tcraft128
01-14-2011, 06:46 AM
I have an 84/42 Catto and it is a work of art. 18lbs with fiberglass spinner from VANS.