PDA

View Full Version : PA-12 Part Number (40281-00) Drawing



musket
06-18-2010, 04:01 PM
This part number refers to an item called an "Extension, Torque Tube Arm"; it is a small part that fastens to the arm of the torque tube that extends below the floorboards and to which the aileron cables attach. It appears to extend that attach point (aileron cable link) an inch or so lower than normal below the floor boards (on an 18, at least), thus giving a bit more clearance to those cables as they penetrate the floorboards to go around the pulleys and on out the side of the fuselage.

I'm looking for the drawing for the above part number to get the material specs and dimensions. Any help, advice, no-no's, or other input would be greatly appreciated. This is for a wide-body experimental 18, by-the-way.

behindpropellers
06-19-2010, 10:28 AM
see pic ill get some dims today.

http://lh4.ggpht.com/_2CuH3hJw2t4/R1dIWsZiOeI/AAAAAAAABwo/IfqKl73B85Q/s800/PC060013.JPG

musket
06-21-2010, 08:51 AM
D*mn, Tim - you are GOOD ! That pic is perfect !

Thanks a bunch!

BTW, I don't care at all what Pierce says about you !