PDA

View Full Version : Front trim pulley pciture needed



supercub
12-18-2009, 12:34 AM
I need a picture or pictures showing the relationship of the two front trim pulleys. What I'm looking for is the approximate angle/offset or whatever you want to call it of the lower single groove pulley to the upper double groove pulley.......anyone have a pic of this. Thanks
Brian

tcraft128
12-18-2009, 02:51 PM
Here is a link to the drawing that shows this. Thank Christian for the drawings.


http://supercubproject.com/drawings/pdfs/A3250023.pdf

supercub
12-18-2009, 05:51 PM
Thanks, but I don't think that shows what I'm looking for. I need to see how the bottome pulley aligns with the top pulley....I believe it's offset and at a slight angle, but not sure.
Brian

Fabman
12-18-2009, 06:45 PM
What you are looking for is on the fuselage dwg. If you build it per the print the lower pulley bracket almost always will still need to be tweaked for the cables to clear. Tack it then check for clearance.

Steve Pierce
12-18-2009, 10:23 PM
We use the print for reference and do like Fabman sugested and tack it in place, install the cable and pulley and tweak to operate without the cables rubbing.

supercub
12-18-2009, 11:12 PM
OK, sounds like a plan, thanks for the info

DW
12-19-2009, 12:01 AM
If a picture's worth 1000 words here's a couple grand.
http://www.supercub.org/photopost/data//500/medium/airframe_161.jpg
http://www.supercub.org/photopost/data//500/medium/airframe_160.jpg

DW

supercub
12-19-2009, 12:19 AM
You made my Christmas ..........thanks for the photos.....those are great......at least 2 thousand words worth.
Brian