jimboflying
MEMBER
I recently purchased some wing and gear attach fittings for my Experimental PA14 project from Cubparts@aol.com. John, the owner, says that he has the type certificate for both the PA12 and PA14 and is making parts in Canada for them. I don't know if they are certified but for my project it didn't matter. They seem to be well made. Along with the parts came some very nice instructions on how to add them to the fuselage frame. The following picture shows the alignment blocks and 5/16 drill rods that help with the alignment process. I first measured the front to back distances, then the side to side, leveled both sides, and then checked things with the trammel points. I thought the whole process really went quite well considering the complexity. The distance between the rods is exactly 1.5" center to center so that means that the attachment holes are also that distance apart vertically.