C90 Prop seal

[jon]

48 hrs SMOH on my cubs C90. The first prop seal started leaking at
10hrs. It was just noticable on windshield after a 2hr flight. I installed
a new seal 4hrs ago, all was good untlil today. I am starting to see
the little dots on the windshield again. The engine has great oil pressure
(40psi) even when hot, is this to high? The case was OH and a new
crankshaft installed. Any tips on installing a new seal.

Thanks, Jon
Fond du lac Wi.

[Steve Pierce]

http://www.supercub.org/phpBB2/viewtopic.php?t=7778&highlight=m764

Go down to my post with the links. I had the same problem with the C90 in the L18C.

[jon]

Thanks Steve ! I will give it a try. Jon