I've now got 15 hrs on my Smith's. I'm really pleased with it's flying. Many parameters to explore yet, taking it slow. We (two new AC ) are experiencing a small amount of oil leaking from cover plates ( I assume these plates cover mounts for vacuum pumps etc, we don't have). We have tightened them up ( new TMX 360 engines) , but with no reduction. We also have some coming out of the case vent tubing, ( no oil/water separator). We are using break in oil 20W50M (mineral oil) , and wandering if this oil leaks more than standard oil?
My AC 's left engine door is rubbing on the front cylinder valve cover. I'm open for suggested remedies.
Thanks Ron
My AC 's left engine door is rubbing on the front cylinder valve cover. I'm open for suggested remedies.
Thanks Ron