View Full Version : pA12 cowl fastners
05-22-2006, 02:34 PM
Need part numbers for the dzus and washers also the wire fastners that they go into. or where to get them
05-22-2006, 05:38 PM
Univair is probably about the only source of these parts. Don't see them offered seperately in their catalog.
Maybe someone else knows the actual supplier of these parts to Univair.
05-22-2006, 06:10 PM
I call uinivar no luck there thiers a guy in tx that has 54 of them but no snap ring part number
05-22-2006, 10:47 PM
Try Gerry at Dakota Airframe. He supplies PA-12 cowlings that are made by a shop near him in Iowa. He sent me some with my airframe but I returned them since I used a Supercub cowl. These cowlings were well made and had the parts you're looking for. I don't know who made them and never asked. Perhaps Gerry can refer you.
05-23-2006, 12:49 AM
For what it's worth; I stock a LOT of the Southco Fasteners in all sizes and types; flush, truss head, winged, countersunk. I have them in 5/16" diameter and 3/16" diameter.
Also have the recepticals to match. Southco is not as fragile as the Dzus wires and are a bit easier (I think) to install and use. Give me a call and see if I have something you can use.
Don't forget we make custom flying wires, too!
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.