Float struts for EDO 2000 on PA 18

Hi,
I'm looking for complete set of struts and ancilliary hardware to mount EDO 2000's onto a PA 18 Experimental Cat. IF anyone has any connections or info leading to aquiring this stuff it would be greatly appreciated.
Thanks
Glenn

Try www.peckaero.com

Frank

ouch! I bought a set of floats this summer that were in pieces. Of course a few of the parts were not with the floats. The little parts, IE fwd. wire pull fitting were each in the $200 class... for certified.

A bunch of these can be made reasonable enough. The struts can be made from bulk material, then you will need the lower fittings.

I have some blocks of 6061, with access to more if you want to make your own.

Did the looking, fittings are 2024 t-3. More expensive, but available in the proper size to make all of these