View Full Version : Wood Spar Splice
04-09-2005, 12:36 AM
Does anyone have any experience with wood spars.... We have a friend who needs a spar splice between the lift strut attach point and the wing root. AC 43.13 can be somewhat confusing on this to me.... any thoughts?
04-09-2005, 01:40 AM
purchase a new blank spar from Wicks and have a local cabinet maker construct new. We did this with a taylor craft. All 4 spars. with metal spars it is not allowable to splice inboard of the strut attach points. If you like I could give you the name and number of the fellow that built spars for us. He built much of a travel air wood wing down here in homer.
04-09-2005, 06:36 AM
Kling Air in Udall, KS makes beautiful Cub spars. No holes to drill. firstname.lastname@example.org or 316-782-3523. I have never seen anything saying you can't splice a wood spar inboard of the lift strut. I have found several J-3 spars from the factory this way.
04-09-2005, 12:44 PM
You might also try Joe at Eyak Air in Willow. I know he is very good with wooden spars for Aeronca's. My guess is he does Cub spars also.
Best of luck,
04-09-2005, 07:09 PM
43.13 says you can splice a wood spar anywhere except at the wing strut attach point. I have spliced wood spars inbetween the strut attach and wing attach points, no problem.
04-10-2005, 12:48 PM
43.13 still talks about that "interplane" what does that mean?
Powered by vBulletin® Version 4.2.4 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.