PDA

View Full Version : 240z starter bracket



Glenn5ft19
11-02-2004, 11:21 AM
Does anyone have any info on making a starter bracket for a 240z starter onto an O320?
Thanks
Glenn

Dan2+2
11-02-2004, 01:21 PM
Glenn, If you will scroll on down in the exp. forum you will see 'toyota starter for a 0320' which has some info. the article in the EAA mag was march 91 It has a drawing to make an adaptor for a toyota starter P/N for the starter is 28100-35020 or 28100-35040. This works for the 122 tooth ring gear . A 12 tooth starter gear is used for the 149 tooth ring gear. I have decided to purchase a starter from an aftermarket supplier instead of atempting to fabricate a toyota system.