BritishCubBloke
SPONSOR
Bellingen, NSW, Australia
Anyone got any advice on this? This occurs when the tailwheel has come round through 270 degrees or so to the left hand side and it sticks and won't come round to trail stright to the rear again.
I've tried filing off a couple of ridges on the inside of the arm assembly (Part No 3214) where I thought the spring might be getting stuck, but no luck.
I'd spoend the $120 on the new arm assembly if I was convinced it would cure the problem. Anyone got any thoughts?
Thanks,
BCB
I've tried filing off a couple of ridges on the inside of the arm assembly (Part No 3214) where I thought the spring might be getting stuck, but no luck.
I'd spoend the $120 on the new arm assembly if I was convinced it would cure the problem. Anyone got any thoughts?
Thanks,
BCB